You have no items in your shopping cart.

Product was successfully added to your shopping cart.

IPV D3 80w TC Box Mod

0 1 100 0

Quick Overview

Read our review of the IPV D3 here

 New to Box Mods and unsure about batteries? Take a look here!

  • Magnetic Battery Cover, far better than the D2

  • Temp Control for Nickel and Titanium

  • Supports 0.1ohm coils

  • Single 18650 battery mod

  • Charge your battery while you vape


Availability: Out of stock

Regular Price: $45.99

Special Price $35.00


Pioneer4You is at it again. Combining the huge success of the IPV D2, Pioneer4You took that same design and made it better!

The IPV D3 Mod is the newest addition to IPV's impressive lineup of legendary IPV mods. The IPV D3 Mod is the newest small and compact mod that builds on the IPV D2. The IPV D3 Mod is an 80W, Temperature Controlled, Single 18650 battery box mod with a solid aluminum body and runs off of a single 18650 battery. Unlike its predecessor, the IPV D3 by Pioneer4You now includes voltage stepdown for lower wattage vaping and better battery life (there are some reports that this mod does not have Step Down). Instead of the old Pioneer4You screw-on or ball bearing battery covers, the D3 utilizes strong magnets to keep the cover on. The wattage range for the IPV D3 box mod is 7 to 80 watts. It sports a temperature range of 212 to 572°F (100-300°C), and like its previous version, the D3 measures its power output for temperature mode in joules. The joule range for the D3 is 10 to 75J.

Featuring the new YIHI SX150H chip, the 80 Watt IPV D3 TC Box Mod is the best vaping device for the travelling vaper that cares about power as much as portability. 

To get an idea of how great the IPV D3 mod is, take a look at the review for the IPV D2 here!

Additional Information

  • 510 threading connection
  • Houses single 18650 battery (battery sold separately)
  • Magnetic Back Cover (No More Screws)
  • Output Power: 7W-80W
  • Output Joule: 10J-75J
  • Resistance:0.15ohm-3.0ohm(Standard),
  • 0.05ohm-0.5ohm(Joules Mode)
  • Output Voltage: 1.0V-7.0V
  • Input Voltage: 3.2V-4.5V
  • Output Current: 1.0A-30.0A 
  • Input Current: 1.3A-35.0A 
  • Temp. Control (100°C-300°C/212°F-572°F)
  • compatible with Nickel wire and Titanium alloy wire
  • Powered by YIHI SX150H
  • Low Voltage Protection
  • Low Resistance Protection
  • High Input Voltage Warning
  • Output Short Circuit Protection
  • Reverse Battery Protection
  • Temperature overheat protection
  • Visual Operating System
  1. Quality Box for the Price review by Matt on 5/9/2016

    It's a smaller box, so as someone with a little bit bigger hands it's a little small, but that's something I can get around. I have it with an RDA running around 40 watts and the battery life is good, would definitely recommend getting a second battery and having that on the charger while you're using the other one though.

Write Your Own Review

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars